Skip to content

An IKEA kitchen fit, day by day: what a typical week looks like

Alex3 min read

Quick answer

IKEA Ireland's average for a kitchen installation is 5 to 7 days. A typical week runs: strip-out on day 1, base and wall units on days 2 and 3, laminate or wood worktops on days 4 and 5, then plinths, panels and cornice. Gas, electrical and plumbing connections are separate trades, and stone worktops come later.

Key takeaways

  • IKEA Ireland puts the average installation at 5 to 7 days, with a range from a few days to a couple of weeks.
  • A UK fitter answering on MyJobQuote gives 6 days for an average fit: one to strip out, two each for units and worktops, one to finish.
  • IKEA's service does not include stone worktops or the electrical, gas and plumbing connections.
  • Stone worktops take at least 7 working days from template to fitting, per Worktops Ireland.
  • Gas work needs a Registered Gas Installer and electrical work a Registered Electrical Contractor (CRU).

This is an illustrative plan, not a customer story. It shows how a typical IKEA METOD kitchen fit runs, built from IKEA Ireland’s published timings and a UK fitter’s stage-by-stage breakdown. No real job, house or customer is described. Your own week will depend on the size of the kitchen and what the other trades need.

5 to 7 days

average IKEA kitchen installation in Ireland

IKEA Ireland FAQ

6 days

one fitter's average: 1 strip-out, 2 units, 2 worktops, 1 finishing

MyJobQuote (UK)

7 working days

stone worktops, template to fitted, at the quickest

Worktops Ireland

What happens before day 1?

Short answer

The plan is checked against the room, the order is delivered and checked, and the room is emptied. IKEA’s own service starts with a pre-installation visit to compare the space with the plan. IKEA also asks you to check every box has arrived and to set up a temporary kitchen elsewhere.

In our illustrative week, the boxes arrive a few days early and are stacked in the kitchen room, as IKEA advises. Any wall patching, painting or new flooring is done before the fit. The plumber and electrician are booked for after the units go in.

The illustrative week, day by day

Short answer

Day 1 is strip-out and services made safe. Days 2 and 3 are base and wall units. Days 4 and 5 are worktops, sink and hob cut-outs. Day 6 is the finishing trim. Connections by the other trades follow. That matches IKEA’s 5 to 7 days.

An illustrative IKEA kitchen fit, day by day
DayWorkWho
Day 1Old kitchen stripped out, water and power made safe, walls checkedFitter, with plumber or electrician if supplies move
Day 2Wall units hung, first base units built and set levelFitter
Day 3Remaining base units, tall housings, integrated appliances placedFitter
Day 4Laminate or wood worktops cut, jointed and fixedFitter
Day 5Sink and hob cut-outs, doors and drawer fronts alignedFitter
Day 6Plinths, cover panels, cornice, light rail, clean-upFitter

The pattern comes from one UK fitter’s answer on MyJobQuote. His average is six days, with the first spent clearing the old kitchen and the last on trims. He adds that assembling flat pack units can add a day or more. METOD cabinets are flat pack, so assembly is built into days 2 and 3 here.

Where do stone worktops fit in?

Short answer

After the units are fixed. Stone is templated on the finished units, then made and fitted later. Worktops Ireland’s quickest turnaround is 7 working days. IKEA’s installation service does not include stone worktops, so the stone supplier templates and fits them.

In that case, day 4 becomes templating, and days 4 and 5 shrink. The kitchen then waits a week or more with no worktop, or a temporary board, before the stone goes in. The hob and sink are connected after that.

When do the plumber, electrician and gas installer come?

Short answer

Once the units and worktops are in and the cut-outs are ready. IKEA’s fitters place appliances, sinks and taps, but the final connections are for other trades. By law, the CRU says, electricians must be on the Safe Electric register and gas installers on the RGI register. Book them early.

In the illustrative week, the plumber connects the sink, dishwasher and washing machine on day 6. A Registered Electrical Contractor connects the oven and hob circuit. If the hob is gas, a Registered Gas Installer connects it. Our guide on who connects the oven and hob explains each trade’s part.

Planning an IKEA kitchen fit?

WhatsApp the IKEA plan and a few room photos for a fixed labour price.

What makes the week run longer?

  • More units, tall housings, an island or a peninsula
  • Walls out of square or floors out of level, common in older houses
  • Stone worktops, which add the templating wait
  • Missing or damaged parts that have to be reordered
  • Services that need moving before the units go in

Our IKEA kitchen installation starts from €1,500 for the labour, and we strip out and take away the old kitchen. For what the fitting labour costs across Dublin, see our kitchen fitting cost guide.

Need a price for ikea kitchen installation?

Send the plan or a photo and we will price it.

Frequently asked questions

How many days will the kitchen be out of use?

Around a week if the worktops are laminate or wood, which fits IKEA's 5 to 7 day average. Stone adds the gap between templating and fitting on top.

Can I use the kitchen while it is being fitted?

Not really. IKEA advises setting up a temporary kitchen elsewhere in the house before the fit starts. A kettle, microwave and a table in another room make the week much easier.

What do I need to do before the fitter arrives?

IKEA lists the basics: check that every box and appliance has been delivered, clear the room, finish any patching, painting or flooring work, and put the packaging in the kitchen room.

Does the fitter connect the hob, oven and sink?

The fitter installs them in their housings and cut-outs. IKEA's own service connects the sink waste pipes but leaves the water, gas and electrical connections to a plumber, a Registered Gas Installer and a Registered Electrical Contractor.

Why do some kitchens take longer than a week?

More units, tall housings, islands, out-of-square walls and stone worktops all add time. IKEA says the time can vary from a few days to a couple of weeks.

Next steps

Where the numbers come from

  1. Kitchen installation service, IKEA Ireland, checked 19 November 2026
  2. Installing a kitchen: how long does it take?, MyJobQuote (UK fitters' answers), checked 19 November 2026
  3. Worktop services Dublin, Worktops Ireland, checked 19 November 2026
  4. RGI and Safe Electric, Commission for Regulation of Utilities, checked 19 November 2026
01 230 8966WhatsApp
Chat on WhatsApp