
Kitchen worktop fitting
Laminate and solid wood worktops cut, jointed and sealed, with sink and hob cut-outs.

Your METOD, ENHET or KNOXHULT kitchen built, hung and finished by an independent fitter, with the old kitchen stripped out first if you need it.
Getting a price is easy
Send a few photos
WhatsApp photos of the room and the order list or supplier plan, if you have one.
Get a straight answer
We tell you what the job involves and a price, by message or on the phone.
Pick a day
Weekdays or weekends, whichever suits. The price is agreed before any work starts.
What are we assembling?
Now press send in WhatsApp
Thanks, that's with us
We will ring you back to talk through the job. If it is urgent, call 01 230 8966.
Flat Pack Mate is a fit-only IKEA kitchen installation service for homes across Dublin and out to Bray. Our fitters install kitchens bought from IKEA in Ballymun or online, with 15+ years of trade experience.
You buy the kitchen, we assemble and install it: cabinets, rail, legs, plinths, cover panels, fillers, laminate worktops and appliances in their housings. Gas, electrical and water connections go to registered trades, the same line IKEA Ireland draws.
Starting prices for labour, set at the low end of what Dublin fitters publish. Worked examples are in our guide to IKEA kitchen installation cost.
We read the IKEA plan against the room, marks the highest point of the floor and draws a level line for the suspension rail. Boxes are checked against the order before any cabinet is opened, so a missing item shows up early.
Walls, windows and pipe outlets measured against the IKEA plan.
Every article number ticked off. Damaged boxes photographed with the label.
One datum line from the highest floor point, used for every rail and cabinet.
Pipes, sockets and gas marked so cabinet back cut-outs land right.
METOD cabinets are 18 mm particleboard with a melamine foil, strong once fixed but only as straight as the rail and legs. Wall cabinets hang on a steel suspension rail, fixed once along the whole run. Base cabinets stand on adjustable legs, set from the highest point of the floor and joined before the worktop goes on.
Assembly is building each cabinet. Installation is hanging, levelling, joining and finishing them. IKEA Ireland's FAQ says you may assemble METOD cabinets yourself, and we then install them.
IKEA Ireland's service assembles and fits its cabinets, fillers, cornice and plinths, cuts laminate and custom-made worktops, and installs its appliances and sinks. Stone worktops, gas, electrical and plumbing connections are not included. Most of its installations take 5 to 7 days and come with a 5-year workmanship guarantee.
IKEA quotes at the planning appointment, then an installer checks the room against the plan on a pre-installation visit, according to IKEA Ireland.
IKEA Ireland kitchen installation: what is in and out
Cabinets, fillers, cornice, plinths
Laminate and custom-made worktops
Cabinet lighting
IKEA appliances
Sink, tap and waste
METOD carries a 25-year guarantee and KNOXHULT a 5-year one. IKEA's workmanship guarantee covers its own installers only, so ask any independent fitter what cover they give, in writing.
IKEA's service is booked through its Kitchen Specialists when you plan and buy. An independent fitter works from any IKEA kitchen, including sale, online and second-hand ones. See our guide to IKEA installation versus your own fitter.
IKEA Ireland says most of its installations are done in 5 to 7 days, and some take a couple of weeks. A stone worktop adds a gap: it is templated after the units are fixed, then made in 5 to 7 working days, so the kitchen runs without a top in that window.
The stages follow one fitter's breakdown on MyJobQuote. A galley is quicker, an island slower.
Day-by-day detail is in our guide on how long a kitchen fit takes.
Where the days go on a kitchen fit
Strip-out
Units
Worktops
Finishing
IKEA laminate worktops are cut, jointed and sealed on site once the base units are level. Custom-made IKEA worktops can come on a separate delivery, so check the dates. Joints and cut-outs are covered on the kitchen worktop fitting page.
Stone tops are measured and fitted by the stone company. Worktops Ireland allows roughly an hour to template, 5 to 7 working days to make the top and 3 to 5 hours to fit it.
Get the sink, tap and hob delivered before the worktop day, so every cut-out is drawn from the real items.
A Registered Gas Installer (RGI) connects a gas hob and gives you a Declaration of Conformance. The oven and hob circuit, new sockets and wired lighting go to a Registered Electrical Contractor (REC) under Safe Electric, who issues a Completion Certificate. A plumber connects the water. We fit the units, sink and appliances into place.
Both schemes are run by the regulator, according to the CRU. Integrated appliances are screwed into their housings and left ready to connect. Book the trades for first fix before the units, and second fix after the worktop.
Who does each connection on an IKEA kitchen in Ireland
Gas hob or cooker
Oven and hob circuits, sockets
Water supply, moved pipes
Sink, tap and waste in the unit
METOD comes in fixed widths of 20, 30, 40, 60 and 80 cm. Walls in older terraces and semis are rarely plumb, and chimney breasts break up runs. Scribed cover panels and fillers close the gap, not a forced cabinet.
IKEA sink units are compact and pipes may need moving, according to AVO Renovations. That is a plumber's job, so spot it on the survey.
IKEA Ireland notes there may be several deliveries, because worktops made to order have their own lead times. Its home planning appointment lasts two hours, so book it early.
Labour for a standard IKEA kitchen starts from about €1,500, with a laminate worktop fitted from €300. IKEA Ireland does not publish its fitting prices: it quotes during the planning appointment. Aloco Kitchens puts installation for a budget kitchen at €1,500 to €3,000.
That band is from Aloco Kitchens' cost breakdown. Cabinet count, tall units, worktop joints and cut-outs, and any strip-out set the final figure.
A photo of the plan and order list is usually enough.
Three routes to an installed METOD kitchen.
Send the IKEA plan, order list and room photos.
One price for the fit, with the trades' visits slotted in.
Old kitchen out, then rail, cabinets, panels and worktops in.
Doors adjusted, packaging cleared, every unit checked with you.




IKEA kitchen ordered? Get the fit booked in.
Send the plan and order list for a price.
I can't recommend Alex highly enough! He came to my rescue after a shed had been partially put up and abandoned, leaving me really worried that the structure wasn't secure and could be damaged by the wind. I gave Alex extremely short notice, but despite being incredibly busy, he went out of his way to prioritise me and make sure my shed was secured. He was professional, reliable and did an absolutely amazing job. He even worked late ...
Alex has done 2 projects in my home, and I cannot recommend him enough. he comes when he says he will, the work is *excellent* and a very good price. Highly recommended
What a fantastic service! I got 4 Ikea wardrobes assembled and they were done so quickly - very clean and tidy workers too. Highly recommend
Can't recommend Alex highly enough, assembled a wardrobe for me today, great job, great rates, thanks Alex
★★★★★
I struggled to find a carpenter who also had locksmith skills and who would actually show up, so I reached out to Alex for help. Despite his busy schedule and my location, he came out within two days. Alex has done work for me over the ...
★★★★★
Excellent. Professional and friendly. Came on time. Did a great job. Very neat and tidy.
Yes. We work from the IKEA plan and order list, so where and when you bought it makes no difference.
Yes. IKEA allows it, and it can shorten the fit. Each cabinet is checked for square before it goes on the rail.
No. A Registered Gas Installer connects gas hobs and gives you a Declaration of Conformance. A Safe Electric REC does oven and hob circuits and issues a Completion Certificate. We fit the appliances into place.
Yes. Send the plan or order list and the price is worked out from the cabinets in it.
It shows up when the boxes are checked before the fit. Photograph the damage with the box label and ask IKEA for a replacement. The rest of the kitchen can usually go in meanwhile.
Yes. Saturday and Sunday slots are available as well as weekdays, so the work can fit around your week.

Laminate and solid wood worktops cut, jointed and sealed, with sink and hob cut-outs.

New doors and drawer fronts hung on your existing cabinets, drilled, aligned and adjusted.
