Skip to content

Flat pack assembly cost in Dublin: per-item, hourly and IKEA prices

Alex8 min read

Quick answer

Flat pack assembly in Dublin costs about €35 to €120 for a single item and €120 to €260 for a wardrobe or PAX, going by published 2026 prices. IKEA Ireland's own service charges a €40 call-out plus a per-product rate. Hourly rates run from about €15 to €40, and Airtasker's Dublin median is €120 per task.

Key takeaways

  • IKEA Ireland adds a €40 call-out to a rate for each product, with wall anchoring thrown in.
  • Airtasker's median price for IKEA assembly in Dublin is €120, based on 19 completed tasks.
  • Dublin Assembly Pros publishes fixed prices from €99 per item and €129 per PAX frame, with no call-out fee.
  • Hourly rates seen in Ireland run €15 to €40 (TaskMatch); one Dublin firm starts at €33 per hour.
  • A bed frame takes about 45 to 90 minutes and a full PAX system 3 to 5 hours (Dublin Assembly Pros).
  • IKEA Ireland prices assembly of sale items on the full retail price.

€40

IKEA Ireland assembly call-out fee, plus a per-product rate

IKEA Ireland

€120

median Dublin IKEA assembly task, 19 completed tasks

Airtasker

€15 to €40

hourly rates seen for IKEA assembly in Ireland

TaskMatch

3 to 5 hours

for a full PAX system with doors and internals

Dublin Assembly Pros

Flat pack assembly is priced three ways in Dublin: a call-out plus a rate per product, a fixed price per item or job, or an hourly rate. The same wardrobe can cost very different amounts depending on which one you pick. This guide sets out what each costs in 2026, how long each item takes, and what to check before you book.

How much does flat pack assembly cost in Dublin?

Short answer

A single item costs about €35 to €120 and a wardrobe or PAX about €120 to €260, going by published Dublin prices and marketplace data. Airtasker’s median for IKEA assembly in Dublin is €120, across 19 completed tasks, with most falling between €62 and €188.

The spread is wide because firms price differently. Some set a fixed minimum per item, some charge by the hour, and IKEA adds a call-out fee. The table pulls the published Dublin figures together.

Flat pack assembly prices in Dublin by item, 2026
ItemPublished priceSource
Small item (shelf, bedside table)From €99Dublin Assembly Pros
Bed frame (MALM, HEMNES or similar)€99 to €129Dublin Assembly Pros
Ottoman or storage bed€120 to €150Dublin Assembly Pros
KALLAX or BILLY unit€99 to €129Dublin Assembly Pros
BESTÅ storage system€100 to €180Dublin Assembly Pros
Flat pack wardrobe€119 to €199Dublin Assembly Pros
IKEA PAXFrom €129 per frameDublin Assembly Pros

Dublin Assembly Pros states its prices are fixed and charges no call-out fee. Our own flat pack assembly service starts from €50 per visit, with beds from €60, flat pack wardrobes from €80 each and PAX from €120 per frame.

What does IKEA charge for assembly in Ireland?

Short answer

IKEA Ireland bills €40 for the call-out, then adds what it calls a professional assembly rate for each product. Fixing to the wall is free. IKEA names Creative Fitting as its provider, and the service leaves out any electrical or plumbing work, which needs a qualified trade.

IKEA does not publish the per-product rates on its service page. You see them when you add assembly at checkout or book in store. Three details are easy to miss:

  • Items bought in a sale, or through Re-shop and Re-use, are priced for assembly on the full retail price
  • IKEA’s help article says the fitters cannot dispose of the packaging
  • Cancelling less than 48 hours before the visit means paying the full assembly charge

A related IKEA Ireland help answer still says assembly through TaskRabbit starts at €35. The current service page names Creative Fitting instead, and TaskRabbit’s own locations page does not list Ireland. Our guide to whether IKEA assembles furniture covers the options in full.

Is hourly or fixed-price assembly cheaper?

Short answer

Hourly can be cheaper for one quick item, fixed price for anything bigger. TaskMatch sees IKEA assembly at €15 to €40 per hour in Ireland, and Flat Pack Assembly Dublin starts at €33 per hour. Fixed prices remove the risk of a slow job, which matters on wardrobes.

How Dublin assemblers charge
Pricing modelExampleBest for
Call-out plus per-product rate€40 call-out (IKEA Ireland)Items bought from IKEA with delivery
Fixed price per itemFrom €99 (Dublin Assembly Pros)Beds, wardrobes, PAX
Hourly rateFrom €33 per hour (flatpackassemblydublin.ie)Small, quick jobs
Marketplace taskMedian €120 (Airtasker, Dublin)One-off jobs, price varies by person

TaskMatch notes that many taskers work out their fee from the time the job takes, and that the fee may or may not include collection from IKEA. Ask whether travel is included.

One older Irish list, from Mr Flatpack, still shows low per-item prices such as €20 for a single bed and €40 for a double wardrobe. It says those prices are subject to a minimum call-out fee, which it does not publish, so the real cost of a one-item visit is unclear.

How much does it cost to assemble a wardrobe?

Short answer

A flat pack wardrobe costs about €115 to €200 to assemble in Dublin. Airtasker’s Dublin wardrobe tasks run €115 to €160, with a median of €150. For PAX, ShamFix gives €160 to €260 for two hinged frames (200 cm) and €300 to €480 for sliding or corner layouts.

Wardrobe assembly cost, Ireland 2026
WardrobePriceSource
Small flat pack wardrobe€119 to €180Dublin Assembly Pros
Wardrobe task, Dublin€115 to €160, median €150Airtasker (4 reviews)
PAX 100 cm, one frame, hinged€90 to €150ShamFix estimate
PAX 200 cm, two frames, hinged€160 to €260ShamFix estimate
PAX sliding or corner, 200 to 300 cm€300 to €480ShamFix estimate

Wall anchoring is part of the job on any tall unit. ShamFix lists anchoring and fixings at €25 to €45 within a PAX quote, while IKEA’s own service includes it.

Got a pile of flat pack boxes?

Send a photo of the boxes or your order list for a fixed price.

Why do flat pack assembly prices vary so much?

Short answer

Because firms charge for different things. Some add a call-out fee, some set a minimum per item, some charge by the hour, and marketplace prices depend on who takes the job. The same two-frame PAX costs €160 to €260 by ShamFix’s estimate and €258 at Dublin Assembly Pros’ per-frame rate.

Comparing one job across several price lists shows the gap more clearly than any average. The figures below are all published; IKEA’s per-product rate is not, so only its call-out is shown.

The same jobs, priced by different Dublin providers
JobPublished priceProvider
Double bed frame€99 to €129Dublin Assembly Pros
Double bed frameFrom €60Flat Pack Mate
Any IKEA item€40 call-out plus product rateIKEA Ireland
Two-frame PAX, hingedFrom €258Dublin Assembly Pros
Two-frame PAX, hinged€160 to €260ShamFix market estimate
Two-frame PAX, hingedFrom €240 (€120 per frame)Flat Pack Mate

Travel is the other variable. TaskMatch notes that a tasker’s fee may or may not include collecting the boxes from IKEA. A firm that quotes a fixed price before the visit carries the risk of a slow job itself; on an hourly rate, you carry it.

How long does flat pack assembly take?

Short answer

A small item takes 30 to 60 minutes, a bed frame 45 to 90 minutes and a full PAX system with doors and internals 3 to 5 hours, according to Dublin Assembly Pros. Taskman, a UK assembler, says fixing a unit to the wall adds about 15 to 30 minutes.

Time is what you are really paying for, so these figures explain most price differences. The table combines a Dublin firm’s times with a UK firm’s fuller list.

Typical assembly time per item
ItemTypical timeSource
Bedside table, chair or small shelf30 to 45 minutesTaskman (UK)
KALLAX or BILLY unit45 to 75 minutesDublin Assembly Pros
Bed frame45 to 90 minutesDublin Assembly Pros
Chest of drawers1 to 1.5 hoursTaskman (UK)
Wardrobe, 2 to 3 hinged doors2 to 3 hoursTaskman (UK)
Bunk bed or mid-sleeper2 to 3 hoursTaskman (UK)
Full PAX system with doors and internals3 to 5 hoursDublin Assembly Pros

Tight rooms, stairs and missing parts add time. Chests of drawers take longer than they look, because each drawer has its own runners to fit and line up.

What is included in an assembly price, and what costs extra?

Short answer

Assembly to the instructions and fixing tall items to the wall are normally included. Packaging removal, dismantling old furniture, wall-mounting shelves and anything electrical or plumbed are often extra or excluded. IKEA Ireland excludes electrical and plumbing work from its assembly service.

What an assembly price usually covers
ItemUsually included?Notes
Building to the instructionsYesSquared, levelled, doors adjusted
Fixing tall units to the wallUsuallyFree with IKEA; €25 to €45 in ShamFix's PAX estimate
Taking packaging awayVariesNot with IKEA's fitters; optional extra at some firms
Dismantling old furnitureExtraAsk for it to be priced
Electrical or plumbing connectionsNoElectrician or plumber

We include our own tools and wall fixings, and we take the packaging away.

Should you assemble flat pack furniture yourself?

Short answer

For small items, often yes. Tall wardrobes, PAX and anything that must be fixed to the wall are where paid help earns its fee. IKEA Ireland’s PAX page warns of a tipping hazard and says the frame must be anchored with fixings suited to your wall. One PAX frame box weighs up to 49.45 kg.

A rough rule: if the instructions show two people, or the item is taller than you, think twice about doing it alone. Common DIY problems are back panels left out of square, drawers that will not close flush and tall units stood up without a wall fixing. Each one is quicker to avoid than to fix later.

How can you keep the cost down?

Short answer

Book everything in one visit, have the boxes in the right rooms, and send the full order list with your quote request. Call-out fees and minimum charges are paid once per visit, so grouping items lowers the price per item. Check every box is there before the assembler arrives.

  • Send the IKEA order or the product links, not just a photo of one box
  • For PAX and BESTÅ, send the planner design code
  • Clear the floor around where each item will be built
  • Tell the assembler about stairs, lifts and parking in advance
  • Say whether you want the packaging taken away

Building a wardrobe in rather than standing it free? PAX or a fitted wardrobe explains the extra work. For built-in wardrobe prices in general, see fitted wardrobe costs.

Need a price for flat pack assembly?

Send the plan or a photo and we will price it.

Frequently asked questions

How much does IKEA charge to assemble furniture in Ireland?

You pay €40 for the visit, then a rate for each product you want built. It does not publish the per-product rates on its service page; you see the price when you add assembly at checkout or in store. Sale items are priced on their full retail price.

How much should I pay someone to assemble a bed?

Dublin Assembly Pros lists bed frames at €99 to €129, ottoman beds at €120 to €150 and bunk beds at €99 to €129. Our bed assembly starts from €60. Expect a standard bed frame to take 45 to 90 minutes.

Is it cheaper to pay by the hour?

For one quick item, sometimes. TaskMatch sees hourly rates of €15 to €40 in Ireland. For a wardrobe or a room of furniture, a fixed price is easier to compare, because a slow assembler on an hourly rate costs you more.

Does flat pack assembly include taking the boxes away?

Not always. IKEA Ireland says its fitters cannot dispose of packaging, and Dublin Assembly Pros lists packaging removal as an optional extra. We take the packaging away as part of the job.

Do assemblers bring their own tools and wall fixings?

They should. IKEA Ireland's PAX page says different wall materials need different fixing devices, and to use screws and plugs suited to your walls. We bring our own tools and the right wall fixings.

How do I keep IKEA assembly costs low?

Group the items into one visit. Call-out fees and minimum charges are paid once, so three items in one visit cost less per item than three separate bookings. Have the boxes in the right rooms before the assembler arrives.

How we checked these figures

Each source was opened on 19 November 2026, and every price and assembly time in this guide was found on its page. Irish prices come from IKEA Ireland, three Dublin assembly firms' own price pages, two Irish task marketplaces (Airtasker and TaskMatch) and ShamFix's market estimate. Airtasker figures are what customers posted or paid, not trade rates. One UK source (Taskman) is used only for how long items take, not for price. Mr Flatpack's list is shown for completeness but looks old, and its minimum call-out fee is not published. Our own starting prices cover labour only.

Where the numbers come from

  1. Assembly and installation services, IKEA Ireland, checked 19 November 2026
  2. How does IKEA assembly service work?, IKEA Ireland, checked 19 November 2026
  3. Locations, Taskrabbit, checked 19 November 2026
  4. Furniture assembly Dublin, Dublin Assembly Pros (furnitureassemblydublin.ie), checked 19 November 2026
  5. IKEA assembly Dublin, Dublin Assembly Pros (furnitureassemblydublin.ie), checked 19 November 2026
  6. Flat pack assembly Dublin, Dublin Assembly Pros (furnitureassemblydublin.ie), checked 19 November 2026
  7. Bed assembly Dublin, Dublin Assembly Pros (furnitureassemblydublin.ie), checked 19 November 2026
  8. IKEA PAX assembly Dublin, Dublin Assembly Pros (furnitureassemblydublin.ie), checked 19 November 2026
  9. Flat Pack Assembly Dublin, flatpackassemblydublin.ie, checked 19 November 2026
  10. IKEA assembly services, TaskMatch, checked 19 November 2026
  11. IKEA assembly services in Dublin, Airtasker, checked 19 November 2026
  12. Wardrobe assembly services in Dublin, Airtasker, checked 19 November 2026
  13. Pricing, Mr Flatpack, checked 19 November 2026
  14. What does IKEA PAX wardrobe assembly cost in Ireland?, ShamFix, 1 October 2026
  15. PAX wardrobe frame, IKEA Ireland, checked 19 November 2026
  16. Furniture assembly London, Taskman (UK), checked 19 November 2026
01 230 8966WhatsApp
Chat on WhatsApp