
Kitchen worktop fitting
Laminate and solid wood worktops cut, jointed and sealed, with sink and hob cut-outs.

You buy the doors from any supplier. We drill, hang and adjust them, with drawer fronts, end panels and plinths to match.
Getting a price is easy
Send a few photos
WhatsApp photos of the room and the order list or supplier plan, if you have one.
Get a straight answer
We tell you what the job involves and a price, by message or on the phone.
Pick a day
Weekdays or weekends, whichever suits. The price is agreed before any work starts.
What are we assembling?
Now press send in WhatsApp
Thanks, that's with us
We will ring you back to talk through the job. If it is urgent, call 01 230 8966.
Flat Pack Mate is a fitting service for kitchen door replacement in Dublin, from the city out to Bray. You order new doors from the supplier you like, and our fitters fit them to the carcasses already on your walls.
The cabinets, worktop and appliances stay put. What changes is every face you see: doors, drawer fronts, end panels, plinths and the handles if you want.
Door fitting is priced per job from your door count, so there is no single starting figure. What changes the cost is set out in our guide to kitchen door replacement cost.
We check the carcasses first. A swollen sink base or a sagging shelf will not hold a new door well, so it is better found now. Then every door is offered up to its cabinet and checked for size before a single hole is drilled.
Sink bases, hinge sides and drawer boxes checked for swelling or water damage.
Each door laid out by its cabinet to confirm size and handing.
Old hinges checked for wear and cup position.
Dust sheets down and drawers emptied for the fronts.
New doors make sense when the carcasses are dry and solid, the layout works and the worktop is fine or being replaced anyway. If the cabinets are swollen, the drawers are failing or you want a new layout, door replacement only hides the problem for a while.
A lot of builder-grade kitchens in Dublin estates have sound carcasses behind tired doors. Vinyl-wrapped doors near ovens often lift at the edges, and that is a common reason to change them. A full refit is a bigger job, covered on the kitchen fitting page.
A respray changes the colour, a wrap changes the surface, and new doors change the style too. Neither fixes a chipped or swollen door. The trade-offs are in our respray or replace guide.
Measure the cabinet opening, not the old door. A door is generally about 5 mm shorter and 4 mm narrower than its cabinet, so a 720 by 500 mm cabinet takes a 715 by 496 mm door. Then measure from the top edge to the centre of the top hinge hole on every door.
The sizing rule is from Ideal Home's replacement door guide. Standard widths cover most kitchens. Odd sizes are made to order, and suppliers usually ask for two to four weeks. Order one sample door first if you are unsure of the colour.
Measuring for replacement doors
Door height
Door width
Hinge position
Standard widths
Often, yes. Most kitchen hinges use a 35 mm cup set into the back of the door. If the new doors are drilled to the same cup positions as the old ones, the hinges and mounting plates can stay. Worn hinges, or a move to soft-close, mean new ones.
Pre-drilled doors save time only when their holes match your cabinet's mounting plates. Blank doors are bored on site with a 35 mm cup bit to the depth the hinge maker specifies. The hinge is then adjusted three ways, for height, depth and side, until the gaps run even down the whole run.
METOD cabinets take IKEA fronts and a range of third-party fronts made to METOD sizes. Check the supplier states METOD compatibility before you order. A full new IKEA kitchen is a different job, covered on the IKEA kitchen installation page.
New doors next to old drawer fronts look unfinished, so count every front before you order. Drawer fronts are screwed to the drawer box from inside and lined up with the doors beside them. Many modern runners have front adjusters for the final tweak.
End panels cover the exposed side of a run. Plinths fill the space under the base units, and cornice and pelmet finish the wall units. All of these show the old colour if they are left, and each one is cut and scribed to walls and floors that are rarely straight.
An integrated dishwasher or fridge-freezer carries its own décor door. How that door is fixed decides what you order: on a door-on-door appliance it is screwed straight to the appliance, while a sliding-hinge appliance has the door hung on cabinet hinges with a slide linking the two.
Check the appliance manual or the model number before ordering, because a door drilled for hinges is no good on a door-on-door fridge. Some integrated appliances also need a vent in the plinth below. If the old plinth has a grille, the new one needs the same opening.
How integrated appliance doors are fixed
Door-on-door
Sliding hinge
Plinth vent
Style and finish are between you and the supplier. On the fitting side, handles are drilled with a jig so each one sits at the same height. Handleless doors with a J-pull need no drilling, but the gaps must be perfect.
Buy from any supplier: we fit the doors, we do not sell them. Irish options include Kitchens4U in Baldoyle and woodworkers.ie, and IKEA sells fronts for METOD cabinets.
Have the doors delivered to you, not to the fitter, and open every box when it arrives. A wrong size or a damaged edge is easier to reorder before the fitting day than on it.
Fitting is priced per job, from the number of doors, drawer fronts and panels, whether hinges are reused or drilled new, and how many appliance doors there are. You buy the doors separately from your supplier. There is no Irish published price for fitting alone, so we quote each kitchen.
Adding a worktop on the same visit is common, because the doors and top together change the whole look. The kitchen worktop fitting page covers laminate and solid wood tops.
Photos and a count are enough for a quote.
Three ways to change how a kitchen looks without replacing the cabinets.
Photos plus the number of doors, fronts and panels.
You order from your supplier, with sizes taken from the cabinets.
Old doors come off, new ones are drilled, hung and the fronts fixed.
Hinges and fronts adjusted for even gaps, old doors cleared.




Doors ordered? Get them hung properly.
Send a photo and a door count for a price.
I can't recommend Alex highly enough! He came to my rescue after a shed had been partially put up and abandoned, leaving me really worried that the structure wasn't secure and could be damaged by the wind. I gave Alex extremely short notice, but despite being incredibly busy, he went out of his way to prioritise me and make sure my shed was secured. He was professional, reliable and did an absolutely amazing job. He even worked late ...
Alex has done 2 projects in my home, and I cannot recommend him enough. he comes when he says he will, the work is *excellent* and a very good price. Highly recommended
What a fantastic service! I got 4 Ikea wardrobes assembled and they were done so quickly - very clean and tidy workers too. Highly recommend
Can't recommend Alex highly enough, assembled a wardrobe for me today, great job, great rates, thanks Alex
★★★★★
I struggled to find a carpenter who also had locksmith skills and who would actually show up, so I reached out to Alex for help. Despite his busy schedule and my location, he came out within two days. Alex has done work for me over the ...
★★★★★
Excellent. Professional and friendly. Came on time. Did a great job. Very neat and tidy.
No. You buy the doors from any supplier you like, including IKEA, and we fit them. That keeps the choice of style and price with you.
Yes, if they are ordered to the cabinet size. A door is usually about 5 mm shorter and 4 mm narrower than the cabinet. Measure the cabinets, not the old doors, which may have been trimmed.
Not always. If the new doors are drilled to the old cup positions and the hinges are not worn, they can be reused. Switching to soft-close is a good moment to replace them.
Yes. Check whether the appliance is door-on-door or sliding hinge first, because that decides how the new door must be drilled. The model number usually tells you.
If you do not want to keep them, they go in the van with the packaging.
Yes. Saturday and Sunday slots are available as well as weekdays, so the work can fit around your week.

Laminate and solid wood worktops cut, jointed and sealed, with sink and hob cut-outs.

METOD cabinets built, levelled, hung and finished with plinths, cover panels and worktops.

Flat pack beds, wardrobes, desks and storage from any shop, built square, levelled and anchored to the wall.