
Sliding wardrobe assembly
Sliding door wardrobe kits assembled, tracks levelled and doors adjusted to run true.

IKEA PAX and wardrobe kits installed wall to wall and floor to ceiling, with filler panels scribed to your walls. Labour only.
Getting a price is easy
Send a few photos
WhatsApp photos of the room and the order list or supplier plan, if you have one.
Get a straight answer
We tell you what the job involves and a price, by message or on the phone.
Pick a day
Weekdays or weekends, whichever suits. The price is agreed before any work starts.
What are we assembling?
Now press send in WhatsApp
Thanks, that's with us
We will ring you back to talk through the job. If it is urgent, call 01 230 8966.
Flat Pack Mate are wardrobe fitters working across Dublin city and county, with Bray included. You buy the wardrobe or kit, and our team does the fitted wardrobe installation, wall to wall and floor to ceiling.
We do not make or sell wardrobes. Our fitters, with more than 15 years in the trade, do the fillers, scribing, wall fixing and door adjustment that make shop-bought frames look built in.
Labour only: the wardrobe is yours, from the shop you choose. Full project figures, frames and doors included, are in our fitted wardrobes cost guide.
We measure the opening at the floor, middle and ceiling before building anything, because few Dublin walls are square. Frames go up first and are fixed to the wall. Fillers are scribed next. Doors and interiors come last.
Width taken at three heights and the ceiling checked for level, so filler sizes are known before any cut.
Sockets, radiators and window reveals are marked, and the wall is checked for cables and pipes before drilling.
Each frame is stood, levelled and screwed to the wall before doors or drawers add weight.
Side and top fillers are marked off the wall and cut, so the gap closes along its full length.
There are three routes to a fitted wardrobe. A specialist company makes its own units to the room. A built-in PAX or wardrobe kit uses standard frames plus scribed fillers, which is the work we do. A freestanding wardrobe only needs assembly and an anti-tip fixing.
The difference shows at the edges. A maker cuts carcasses to the room, so "a 2.34m gap becomes a 2.34m wardrobe", as The Wardrobe Man puts it. With PAX, the same gap takes 2.0 m of frames and 34 cm of filler panels, split between the two sides.
Scribed fillers are not a shortcut. They follow a wall that leans or bows, which a straight frame cannot do. Our IKEA PAX vs fitted wardrobes guide sets the cost and finish side by side.
Customers buy from IKEA in Ballymun, diy.ie (B&Q Ireland), Woodie's, Harvey Norman, Argos, JYSK and Wayfair.ie, and we have no tie to any of them.
Built in means no visible gap at the walls, the ceiling or the floor. Side fillers are scribed to the walls, a top filler or cornice closes the space to the ceiling, and the plinth is cut to the floor.
Alcoves beside a chimney breast are rarely square or the same depth top to bottom. Measure the depth at the back wall and at the face of the breast. PAX comes in 58 cm and 35 cm depths, according to IKEA, and a coat hanger needs about 550 to 600 mm of internal depth, according to HM Elite Interiors. A shallow alcove suits shelves, not hanging.
Under a slope, full-height frames stand at the tall end and lower frames or shelving follow the roof line, with angled filler panels closing the top. Measure the ceiling at its highest and lowest points before you order. Keep any eaves access hatch reachable, because it is the only way into the rest of the roof space.
A walk-in wardrobe is a run of frames on one, two or three walls, with a clear walkway between. Corner units link the runs into an L or U shape. The box room in a three-bed semi is the usual candidate, though turning it over to clothes means the house is marketed with one bedroom fewer.
The sizes below come from UK planner HM Elite Interiors. One Irish guide quotes 16 m2 as a minimum room, but that is the size of a large double bedroom, not a walk-in. Prices for the room and fit-out are in our walk-in wardrobe cost guide.
Walk-in wardrobe sizes (HM Elite Interiors)
Single-sided, one person
Double-sided
Walkway
Wall to wardrobe face
Inward hinged room door
Every frame is screwed to the wall near the top, so a loaded wardrobe cannot tip forward. The fixing depends on what sits behind the plaster: masonry plugs in solid block, cavity fixings in hollow block, long screws or toggles in dry-lined and stud walls. IKEA supplies no plugs or screws with PAX.
Hollow block catches people out: it sounds solid, yet an ordinary plug spins in the void. Attic conversions and apartments are usually stud, where the screw goes into a timber or a spring toggle bridges the gap between two.
Wall types in Dublin homes and the fixing each takes
Solid block or brick
Hollow block
Dot-and-dab plasterboard
Timber or metal stud
Fitted furniture "should not hide damp, condensation or an untreated external wall", warns Sliding Door Wardrobes in Cork. In older Irish houses, check the wall for black spots before the frames go up, and fix the cause first.
Battery or rechargeable LED strips with motion sensors need no wiring, so they can go in with the wardrobe. Lighting wired into the mains, a new spur or a switched feed is electrical work for a Safe Electric Registered Electrical Contractor (REC), who issues a Completion Certificate for certifiable work.
Plan the cable route before the frames go up, so a REC can bring a feed to the top while the wall is clear. The CRU runs the Safe Electric scheme.
We are not Registered Electrical Contractors. Wired lights, sockets and spurs inside a wardrobe are done by a REC, arranged by you or by us at extra cost.
The doors come with the wardrobe you buy, so the finish is your choice. Mirror and glass doors weigh more than board, so they go on once the frames are fixed and checked.
A Cork sliding wardrobe maker recommends roughly 1,200 mm or more for sliding doors. Hinged doors need floor space to swing open. In a narrow bedroom, sliding wardrobe installation is usually the better fit.
Plan the interior around what you own. Measure your longest coat and decide how much folds rather than hangs. IKEA's KOMPLEMENT range covers most of the list below.
Installation starts from €225 per wardrobe, labour only, for a built-in PAX or kit run. The wardrobe is bought separately. Aloco puts Irish wardrobe installation at €225 to €900 depending on complexity, and Tegre lists supply-and-fit sliding wardrobes from €800 per 1.5 m.
The price moves with the number of frames, the ceiling height, how much scribing the walls need, slopes and corners, and sliding doors. Dismantling an old wardrobe first also adds time.
A few photos and measurements are enough for a fixed price.
How a maker, a built-in kit and a freestanding wardrobe compare.
Photos of the wall, the main measurements and what you ordered.
A single price for the job, with a date after delivery.
Frames are fixed, fillers scribed and doors hung, wall to wall.
Doors and drawers are set, the boxes go, and you test each one.




Wardrobe bought? Get it fitted.
Send the planner code or order list and a photo of the wall for a fixed price.
I can't recommend Alex highly enough! He came to my rescue after a shed had been partially put up and abandoned, leaving me really worried that the structure wasn't secure and could be damaged by the wind. I gave Alex extremely short notice, but despite being incredibly busy, he went out of his way to prioritise me and make sure my shed was secured. He was professional, reliable and did an absolutely amazing job. He even worked late ...
Alex has done 2 projects in my home, and I cannot recommend him enough. he comes when he says he will, the work is *excellent* and a very good price. Highly recommended
What a fantastic service! I got 4 Ikea wardrobes assembled and they were done so quickly - very clean and tidy workers too. Highly recommend
Can't recommend Alex highly enough, assembled a wardrobe for me today, great job, great rates, thanks Alex
★★★★★
I struggled to find a carpenter who also had locksmith skills and who would actually show up, so I reached out to Alex for help. Despite his busy schedule and my location, he came out within two days. Alex has done work for me over the ...
★★★★★
Excellent. Professional and friendly. Came on time. Did a great job. Very neat and tidy.
No. You buy it from IKEA, diy.ie, Woodie's or any other shop, and we install it.
Yes. Fillers scribed to the walls, a top filler to the ceiling and a plinth or trimmed skirting make a run of PAX read as built in. The frames themselves stay standard sizes.
Yes, with taller frames at the high end, lower frames or shelving under the slope and angled fillers on top. Measure the ceiling at both ends before ordering, and leave any eaves hatch reachable.
ShamFix's Irish estimates put a 250 to 300 cm PAX with drawers at 4 to 6 hours, and sliding door or corner layouts at 5 to 8 hours. Scribing fillers to the walls and ceiling comes on top of that.
Only for wired lighting. Battery sensor strips need no wiring, but a mains feed or new spur is work for a Registered Electrical Contractor.
Yes. Saturday and Sunday slots are available as well as weekdays, so the work can fit around your week.

Sliding door wardrobe kits assembled, tracks levelled and doors adjusted to run true.

PAX frames, doors and KOMPLEMENT interiors built, fixed to the wall and adjusted.

Flat pack beds, wardrobes, desks and storage from any shop, built square, levelled and anchored to the wall.