
Media wall fireplace installation
Media wall kits with a plug-in electric fire built in, with the gaps the fire's maker asks for.

You buy the media wall kit or TV units, we assemble them, fix them to the wall and hang the TV on your bracket.
Getting a price is easy
Send a few photos
WhatsApp photos of the room and the order list or supplier plan, if you have one.
Get a straight answer
We tell you what the job involves and a price, by message or on the phone.
Pick a day
Weekdays or weekends, whichever suits. The price is agreed before any work starts.
What are we assembling?
Now press send in WhatsApp
Thanks, that's with us
We will ring you back to talk through the job. If it is urgent, call 01 230 8966.
Flat Pack Mate handles media wall installation in homes across Dublin and north Wicklow, Bray included. Our fitters assemble the kit or units you have bought, fix them to the wall and mount the TV.
We do not make, sell or design media walls, and we do not build stud walls from timber and plasterboard. If you have the kit, or an IKEA order for one, we build it in.
Labour only: the kit, fire and bracket are bought by you. What built media walls cost in Ireland, materials included, is broken down in our media wall cost guide.
We check the wall, the kit and the socket positions first. The base goes down level, the surround is built up and fixed to the wall, and the TV goes on last. Most kits need two people to lift the larger panels, so plan for a helper if the kit says so.
Existing sockets and the aerial point are marked, so the kit's cable openings line up with them.
The base is packed and levelled first, because every panel above it follows that line.
The surround is fixed back to the wall so it cannot lean forward when the TV is on it.
The TV goes on your bracket once the surround is square and the cables are through.
A media wall here means a ready-made kit or a set of units that comes flat in boxes. Kits and units come from shops such as IKEA, DID Electrical, Kean's, Harvey Norman and Wayfair.ie, and we build what arrives.
The Dimplex DMW01 kit sold by DID Electrical comes in three pieces: a base, a fire housing and a TV surround. DID lists it at €3,499.99 and describes it as a flat-to-wall build for two people, with a fire that plugs into a standard 13 amp socket. Glen Dimplex says its DIY media wall suits 55 to 65 inch TVs.
BESTÅ TV benches, wall cabinets and shelves can be combined into a full TV wall. The wall cabinets hang on a suspension rail, so the rail has to be dead level and fixed into something solid. Alcove units and floating shelves from other shops can be added in the same visit.
Flat pack MDF TV units with an electric fire go together like a large TV bench, then the fire slides into its opening. See our media wall with fireplace page for fire clearances.
Leave at least a third of the TV's width as surround on each side, and match the fire's width to the TV if you have one. Built walls need 250 to 350 mm of depth out from the wall, according to MS Carpentry. A kit sets its own size, so check it against the room first.
Measure the wall and the floor space in front of it before you order: a deep kit can block a door or radiator.
Media wall sizing rules
Surround each side of the TV
Depth out from the wall
Fire width
Kit TV range
Buy the TV and the bracket before the visit. The kit's panel shows where the bracket must sit, and the bracket must carry the TV's weight and match its VESA hole pattern. We fit the bracket you supply, through the panel and into the wall behind wherever the kit allows it.
Tilt and full-motion arms stand further out than a flat bracket, so check the kit leaves room for the arm. Bracket types are compared on our TV wall mounting page.
Hang the TV from the wall behind the kit, not from MDF alone, whenever the kit's instructions allow it. MDF is a cladding, not a structure.
Most kits leave a channel or a hollow behind the TV panel. HDMI, power and aerial leads run down it to the media shelf, so nothing hangs below the screen. AV boxes need air: a UK trade guide warns against sealing them into an airtight void, so keep a vent or an open back.
LED strips come in two kinds. Plug-in strips with their own driver and remote can be fitted during the build. Downlights or strips wired into the house circuit are a job for a REC.
A Registered Electrical Contractor. In Ireland a new circuit is Restricted Works, so only a REC may install it, and it is certified. We assemble the wall around your existing sockets and you plug the kit in. A new socket or fused spur is booked with a REC before the build.
The HSA's guidance says installing or replacing circuits is Restricted Works. Adding to an existing circuit falls outside that scope but must still meet the national wiring rules, so use a REC for that too. UK pages that mention Part P do not apply here.
Electrical jobs on a media wall and who does them
Plugging a kit into an existing socket
New socket off an existing circuit
New circuit or fused spur
Wired downlights or LED driver
The kit is only as steady as its fixing. Hollow block, common in Irish homes built from the 1970s to the 2000s, takes cavity fixings rather than standard plugs.
Many Dublin living rooms have a chimney breast with an alcove on each side. A kit can sit across the breast, or alcove units can fill the sides with the TV on the breast itself. If the wall still has an old open fire, get advice on the chimney before anything is built over it. Our comparison of media walls and alcove units sets out both layouts.
Assembling a kit you have bought starts from €250 labour, or €350 with a plug-in fire. A stud-built media wall is a different job: Irish firms publish built-in walls at €1,200 to €2,000 and full feature walls with a fire at €2,500 to €6,000+, materials included.
Those built-wall figures are FlatPack.ie's ranges, as listed by AJ Furniture. TaskMatch puts built media walls from around €1,000. A UK trade pricing guide says a stud wall takes a carpenter, an electrician and a plasterer three to six days.
€1,200 to €2,000
Built-in media wall, FlatPack.ie range
via ajfurniture.ie, Nov 2026
€2,500 to €6,000+
Feature wall with electric fire, plastered and painted
via ajfurniture.ie, Nov 2026
3 to 6 days
Typical stud-built wall, three trades
trade2base.com (UK)
Three routes to a media wall in a Dublin living room.
Send the kit name or link, the TV size and a photo of the wall with its sockets.
If a new socket is needed, a REC fits it before the build day.
Base, surround and shelves are built, levelled and fixed back to the wall.
Your bracket goes on, cables are routed and the TV is hung and checked.




Media wall kit on the way? Get the fitter booked.
Send the kit name, TV size and a photo of the wall.
I can't recommend Alex highly enough! He came to my rescue after a shed had been partially put up and abandoned, leaving me really worried that the structure wasn't secure and could be damaged by the wind. I gave Alex extremely short notice, but despite being incredibly busy, he went out of his way to prioritise me and make sure my shed was secured. He was professional, reliable and did an absolutely amazing job. He even worked late ...
Alex has done 2 projects in my home, and I cannot recommend him enough. he comes when he says he will, the work is *excellent* and a very good price. Highly recommended
What a fantastic service! I got 4 Ikea wardrobes assembled and they were done so quickly - very clean and tidy workers too. Highly recommend
Can't recommend Alex highly enough, assembled a wardrobe for me today, great job, great rates, thanks Alex
★★★★★
I struggled to find a carpenter who also had locksmith skills and who would actually show up, so I reached out to Alex for help. Despite his busy schedule and my location, he came out within two days. Alex has done work for me over the ...
★★★★★
Excellent. Professional and friendly. Came on time. Did a great job. Very neat and tidy.
No. You choose and buy the kit, units, fire and bracket. We assemble them, fix them to the wall and hang the TV. For a wall built from timber and plasterboard, you need a carpenter and a plasterer.
No. A new socket, spur or circuit is a REC's work. Book the REC before the build, so the socket is in place when the kit goes up.
Some kits say so. DID describes the Dimplex DMW01 as designed for installation by two people. Tell us the kit name and we will say if a helper is needed for the lift.
Yes, if the fixings suit it. On dot-and-dab, long fixings go through to the block behind. On a stud wall, the kit and the TV bracket are fixed into the timber studs, not the board alone.
A kit like the DMW01 is a flat-to-wall build that the maker designed for two people, and it is usually finished in a single visit. BESTÅ walls with many wall cabinets take longer, because each cabinet hangs on the rail.
Yes. Saturday and Sunday slots are available as well as weekdays, so the work can fit around your week.

Media wall kits with a plug-in electric fire built in, with the gaps the fire's maker asks for.

TVs and soundbars mounted level on block, plasterboard or stud walls, with the right fixings.
