
Media wall installation
Media wall kits and units you have bought, assembled, fixed to the wall and the TV mounted.

Your TV hung on your bracket, with fixings matched to block, plasterboard or stud, level and at a height you can watch.
Getting a price is easy
Send a few photos
WhatsApp photos of the room and the order list or supplier plan, if you have one.
Get a straight answer
We tell you what the job involves and a price, by message or on the phone.
Pick a day
Weekdays or weekends, whichever suits. The price is agreed before any work starts.
What are we assembling?
Now press send in WhatsApp
Thanks, that's with us
We will ring you back to talk through the job. If it is urgent, call 01 230 8966.
Flat Pack Mate runs a TV wall mounting service in Dublin, Bray and the commuter towns around them. We hang your TV on the bracket you have bought, with fixings chosen for the way the wall is built.
Most Dublin walls look the same once painted. Behind them can be solid block, hollow block, plasterboard on dabs, timber stud or old lath and plaster, and each one holds a screw differently.
You supply the bracket. Dublin firms' prices by screen size are set out in the TV wall mounting cost guide.
We knock first. A dull thud usually means block or brick, and a hollow sound means plasterboard on timber or a metal frame. A detector then finds studs and pipes, and a small pilot hole confirms what is behind before the bracket goes on.
A dull thud points to block or brick; a hollow note points to board on a frame.
A detector marks timber studs, metal track and pipes or cables before drilling.
The screen centre is marked with you seated, not standing.
The wall plate is set dead level, since a TV shows any tilt at once.
It depends on the wall. Solid block takes masonry plugs. Hollow block, found in many Irish houses built between the 1970s and 2000s, needs cavity fixings. Dot-and-dab needs long screws or coach bolts into the block behind. Stud walls need the bracket screwed into the timber, or a plywood pattress.
The full method for board walls is in our guide to a TV on a plasterboard wall. The short version is in the table.
Wall types and how a TV bracket is fixed to each
Solid block or brick
Hollow block
Dot-and-dab plasterboard
Timber or metal stud
Lath and plaster
Many Dublin apartments and newer houses have timber or metal stud partitions. If the studs are not where the bracket needs them, a plywood pattress fitted between the studs gives a solid fixing across the whole plate, according to a UK guide to stud and drylined walls.
Full-motion arms put more strain on the wall than flat brackets, because the TV's weight sits further out. If a stud wall cannot carry a big TV on an arm, a fixed bracket is the safer choice.
Standard cavity anchors will not open behind dot-and-dab plasterboard, because the gap to the block is too small. The fixing has to reach the block itself.
A flat bracket for a TV you watch straight on, a tilt bracket for a TV mounted higher, such as above a fire, and a full-motion arm for a corner or an open-plan room. Check the bracket's VESA pattern and weight rating against the TV before you buy.
VESA is the hole pattern on the back of the TV, written in millimetres, for example 200 x 200 or 400 x 400. The bracket must list your TV's pattern and carry more than its weight.
TV bracket types
Flat or slim
Tilt
Full motion
The usual aim is the centre of the screen close to seated eye level. Above a fireplace that is rarely possible, so a tilt bracket and the fire's heat clearance decide the height. The TV above a fireplace guide covers that case.
Soundbars go on their own bracket under the TV, or on a shelf. Some brackets clip the soundbar to the TV itself, which keeps the two together on a full-motion arm.
Cables can run in surface trunking painted to match, inside a hollow wall, or in a chase cut into solid wall and replastered. Moving or adding a socket behind the TV is electrical work, and Irish rules reserve any new circuit for a Registered Electrical Contractor as Restricted Works.
Adding a socket to an existing circuit is outside that scope, according to the HSA, but it must still meet the wiring rules, so use a REC for it as well. We do not move sockets; we hang the TV around the socket you have.
Ways to hide TV cables
Surface trunking
Inside a hollow wall
Chased into the wall
In a rented home, ask the landlord before any holes go in. Apartment buildings may have their own rules on drilling hours and on fixing into shared walls, so check with the management company first. Concrete walls in apartment blocks take masonry fixings and a sharp drill bit, and they are noisy to drill.
Our TV mounting starts from €110 per TV on the bracket you supply. Other Dublin firms publish €99 to €130 for a standard TV, with larger screens and full-motion arms from about €129. Cable hiding is listed from €20 to €40, and a soundbar from €49 extra.
The figures in the table come from the firms' own price pages. Prices go up with screen size, a full-motion arm, a soundbar and cable work.
Published TV mounting prices in Dublin, checked November 2026
TV up to 50 inch
TV 55 inch
TV 65 to 100 inch
TV to 55 inch, customer's bracket
Soundbar add-on
A fitter, an electrical contractor or doing it yourself.
Send the TV model, the bracket you bought and a picture showing the wall and sockets.
A price comes back with a time, weekday or weekend.
We work out what the wall is built from and fix the bracket to suit.
The TV goes up level, leads are plugged in and the picture checked.




New TV in the box? Get it on the wall.
Send the TV model, bracket and a snap of the wall.
I can't recommend Alex highly enough! He came to my rescue after a shed had been partially put up and abandoned, leaving me really worried that the structure wasn't secure and could be damaged by the wind. I gave Alex extremely short notice, but despite being incredibly busy, he went out of his way to prioritise me and make sure my shed was secured. He was professional, reliable and did an absolutely amazing job. He even worked late ...
Alex has done 2 projects in my home, and I cannot recommend him enough. he comes when he says he will, the work is *excellent* and a very good price. Highly recommended
What a fantastic service! I got 4 Ikea wardrobes assembled and they were done so quickly - very clean and tidy workers too. Highly recommend
Can't recommend Alex highly enough, assembled a wardrobe for me today, great job, great rates, thanks Alex
★★★★★
I struggled to find a carpenter who also had locksmith skills and who would actually show up, so I reached out to Alex for help. Despite his busy schedule and my location, he came out within two days. Alex has done work for me over the ...
★★★★★
Excellent. Professional and friendly. Came on time. Did a great job. Very neat and tidy.
No. You buy the bracket, which lets you pick the style and price you want. Check it lists your TV's VESA pattern and weight. We bring the wall fixings.
Yes, if it is fixed through to something solid. On dot-and-dab, long fixings reach the block behind. On a stud wall, the bracket goes into the studs or onto a plywood pattress. Board alone should not carry a large TV.
No. Moving or adding a socket needs a Registered Electrical Contractor. Get that done first, and the TV can be hung over the new socket.
Yes, on a chimney breast, if the fire's heat clearance and a sensible viewing height can both be met. A tilt bracket usually helps. We check the fire's manual first.
A fixed or tilt bracket on solid block is the quickest job. Full-motion arms, stud walls that need a pattress, lath and plaster, soundbars and cable trunking all add time, so mention them when you book.
Yes. Saturday and Sunday slots are available as well as weekdays, so the work can fit around your week.

Media wall kits and units you have bought, assembled, fixed to the wall and the TV mounted.

Media wall kits with a plug-in electric fire built in, with the gaps the fire's maker asks for.

Flat pack beds, wardrobes, desks and storage from any shop, built square, levelled and anchored to the wall.