Skip to content

Kitchen fitting cost in Dublin: what a fitter charges in 2026

Alex9 min read

Quick answer

Labour-only kitchen fitting in Dublin costs about €1,500 to €3,500 for a standard kitchen in 2026, going by the bands Dublin kitchen companies publish. Budget flat pack kitchens sit near the bottom of that range and larger mid-range kitchens near the top. Stone worktops, gas, electrical and plumbing connections, and tiling are priced on top.

Key takeaways

  • Dublin fitters publish labour-only bands of €1,500 to €3,500 for a standard kitchen (Aloco Kitchens, 2026).
  • Installation runs €1,500 to €3,000 for a budget kitchen and €2,500 to €4,000 for mid-range, by the same source.
  • Stone worktops add about €450 per linear metre supplied and fitted, and 7 to 10 working days from template to fit (Worktops Ireland).
  • IKEA Ireland says most of its kitchen installations take 5 to 7 days.
  • Gas, electrical and water connections are separate trades: a Registered Gas Installer, a Registered Electrical Contractor and a plumber.
  • Supply and installation of kitchen units as a fixture is VAT rated at 13.5%, subject to the two-thirds rule (Revenue).

€1,500 to €3,500

labour-only fitting for a standard Dublin kitchen

Aloco Kitchens, 2026

5 to 7 days

for most IKEA Ireland kitchen installations

IKEA Ireland

€450 per metre

typical starting price for quartz or granite, supplied and fitted

Worktops Ireland, Dublin

13.5%

VAT on kitchen units supplied and installed as a fixture

Revenue, subject to the two-thirds rule

The kitchen fitting cost is the labour to turn a delivered kitchen into a working one. It is separate from the price of the units, the worktops and the appliances. That split matters, because most Dublin kitchens are now bought from one place and fitted by someone else.

How much does kitchen fitting cost in Dublin?

Short answer

Labour-only fitting for a standard Dublin kitchen costs about €1,500 to €3,500 in 2026. That is the band Aloco Kitchens, a Dublin kitchen company, publishes for fitting a standard kitchen. It does not include worktops, tiles, flooring or appliance connections.

The same company breaks installation down by kitchen type in its guide to new kitchen costs. Budget kitchens cost €1,500 to €3,000 to install and mid-range kitchens €2,500 to €4,000. For bespoke kitchens, installation is usually part of the supplier’s price.

Kitchen installation cost by kitchen type, Ireland 2026
Kitchen typeTypical installation costNotes
Budget flat pack (IKEA, B&Q type)€1,500 to €3,000Most often fitted by an independent fitter
Mid-range rigid kitchen€2,500 to €4,000More units, heavier carcasses, more panels
Bespoke kitchenIncluded in most casesFitted by the maker's own team

Source: Aloco Kitchens, new kitchen costs in Ireland (2026).

Our own kitchen fitting starts from €1,500, which sits at the bottom of that published band. Where a job lands above it depends on the factors in the next two sections.

What is included in a kitchen fitting price?

Short answer

A fitting price normally covers building and fixing the units, hanging doors, fitting drawers, cutting and fixing laminate or wood worktops, and the finishing panels. It normally excludes gas, electrical and plumbing connections, plastering, tiling and stone worktops, which are other trades.

The cleanest way to compare quotes is to put them side by side against the same list. A cheap quote that leaves out the plinths, the cornice or the old kitchen removal often ends up dearer.

What a kitchen fitting quote usually covers
ItemUsually in the fitter's price?If not, who does it
Building and levelling base and wall unitsYesFitter
Doors, drawers, hinges and handlesYesFitter
Laminate or solid wood worktops, sink and hob cut-outsYes, checkFitter
Plinths, end panels, cornice and light railYes, checkFitter
Integrated appliances into their housingsYesFitter
Removing the old kitchenSometimesFitter or a skip
Gas hob connectionNoRegistered Gas Installer (RGI)
New or moved circuits and socketsNoRegistered Electrical Contractor (REC)
Water supply and waste pipeworkNoPlumber
Stone worktopsNoStone supplier templates and fits
Plastering and tilingNoPlasterer, tiler

Aloco puts the extras for tiling, plumbing and electrics at about €500 to €2,000 on a budget kitchen and €1,000 to €3,000 on a mid-range one. Treat those as a separate budget line, not part of the fitter’s price.

What makes a kitchen fit cost more?

Short answer

The number of units, tall housings and corner units, the worktop joints and cut-outs, the state of the walls and floor, and access to the room. Taking out the old kitchen first and fitting in an older house both add time.

Fitters price by the work, and the work grows with each of these. A galley kitchen with eight units and one straight worktop is a short job. An L-shaped kitchen with an island, two tall housings and a mitred worktop corner is a long one.

What moves the price of a kitchen fit
FactorWhy it takes longerEffect on price
Number of units and panelsEach one is built, levelled and fixedLargest single driver
Tall housings and integrated appliancesHeavy, must be plumb, appliance doors alignedMedium
Corner units, islands and peninsulasExtra fixing, end panels, sometimes a plinth returnMedium
Worktop joints and cut-outsEach joint and each hob or sink cut-out is careful workMedium
Out-of-square walls and uneven floorsUnits packed level, panels scribed to the wallLow to medium, high in period houses
Removing the old kitchenStrip-out and disposal before the fit startsAdds a day or less
Access and parkingLong carries, stairs, no liftLow

Older houses are the hidden one. In Victorian and 1930s homes walls lean and floors fall, so end panels are scribed to the wall and base units packed up. A fitter who has seen photos of the room can price that in, rather than adding it on the day.

Want a fixed price for your kitchen?

Send the supplier's plan and a few photos of the room.

How much do worktops add to the kitchen fitting cost?

Short answer

Laminate and wood worktops are usually fitted by the kitchen fitter as part of the job. Stone is different: quartz and granite typically start at about €450 per linear metre supplied and fitted, and most Dublin stone worktop jobs come to €1,900 to €5,500, according to Worktops Ireland.

Stone worktops are templated after the units are fixed, then made to measure. Worktops Ireland says templating takes about an hour, fabrication runs 5 to 7 working days, and most Dublin installs are fitted within 7 to 10 working days of the template. The kitchen runs without a worktop, or on a temporary board, in between.

If you are replacing worktops on an existing kitchen, kitchenworktops.ie lists installation at €300 for new worktops and €450 where old worktops are removed first. Our kitchen worktop fitting page covers laminate and wood worktops, joints and cut-outs in detail.

Do you need an electrician, a plumber and a gas installer?

Short answer

Usually, yes. In Ireland, gas connections must be made by a Registered Gas Installer, new or altered circuits by a Registered Electrical Contractor, and water by a plumber. The CRU runs both registration schemes, and each registered trade must give you a certificate for the work.

The Commission for Regulation of Utilities says an RGI must give the customer a Declaration of Conformance for gas work, and a Registered Electrical Contractor must give a Completion Certificate. IKEA’s own installation service in Ireland draws the same line. It leaves electrical and gas connections and plumbing connections to other trades.

Who connects what in an Irish kitchen
ConnectionWho must do itWhat you should get
Gas hob or cookerRegistered Gas Installer (RGI)Declaration of Conformance
New cooker circuit, moved or extra socketsRegistered Electrical Contractor (REC)Completion Certificate
Sink, dishwasher and washing machine waterPlumberInvoice for the work

Book the trades for after the units and worktops are in, so the cut-outs and housings are ready for them. We are not registered for gas or electrical work and do not make those connections. Our guide to who connects the oven and hob goes through each trade’s part.

How long does a kitchen fit take?

Short answer

About a week for a standard kitchen. IKEA Ireland says most of its kitchen installations are completed in 5 to 7 days. Stone worktops add a wait of 7 to 10 working days between templating and fitting.

Fitters describe a typical fit in stages. One UK fitter’s breakdown on MyJobQuote is a day to rip out and alter service supplies, two days for units, two days for worktops, and a day for light rail, cornice and plinths. That matches the IKEA figure closely.

A typical kitchen fit, stage by stage
StageTypical timeWho
Strip out the old kitchen, services altered1 dayFitter, then plumber and electrician
Base and wall units built and fixed2 daysFitter
Worktops cut, jointed and fixedUp to 2 daysFitter, or stone supplier later
Plinths, cornice, light rail, panels1 dayFitter
Gas, electrical and water connectionsUsually under a day eachRGI, REC, plumber

Source: MyJobQuote fitters’ answers (UK) and IKEA Ireland. Our guide on how long it takes to fit a kitchen has a day-by-day plan.

Is VAT included in kitchen fitting prices?

Short answer

It depends on the fitter. Revenue rates kitchen units supplied and installed as a fixture at the reduced rate of 13.5%, subject to the two-thirds rule. A fitter who is not VAT registered charges no VAT at all. Always ask whether a quote includes VAT before you compare it.

Revenue’s VAT rates database lists kitchen units supplied on their own at the standard rate of 23%. The same entry says supply and installation as a fixture is liable at the reduced rate, subject to the two-thirds rule. Under that rule, if the goods make up more than two-thirds of the price, the whole job is charged at the standard rate. Revenue’s current rates are 23% standard and 13.5% reduced.

Most published Dublin price pages do not say whether VAT is included, so ask before you compare two quotes.

IKEA’s installation service or an independent fitter?

Short answer

IKEA Ireland fits IKEA kitchens, quotes at the planning stage and includes a 5-year workmanship guarantee. An independent fitter can fit a kitchen from any supplier and give a fixed price from your plan. Neither makes gas, electrical or plumbing connections.

IKEA Ireland does not publish its kitchen installation price on its installation page. The Home Upgrade Co., a Dublin kitchen company, reports that IKEA quotes fitting at planning after a €100 non-refundable pre-installation visit. That figure comes from a competitor’s article, not from IKEA.

IKEA installation service compared with an independent fitter
IKEA Ireland installationIndependent fitter
Kitchens from other suppliersNoYes
How it is pricedQuoted at planningFixed price from your plan
Stone worktopsNot includedStone supplier fits them
Gas, electrical, plumbing connectionsNot includedNot included
Typical time5 to 7 daysAbout a week
Workmanship guarantee5 yearsAsk each fitter

Our IKEA kitchen installation page covers METOD fitting step by step.

What does a whole new kitchen cost, with fitting?

Short answer

Fitting is a fraction of the total. Aloco puts a budget flat pack kitchen fully installed at €5,000 to €10,000 and mid-range at €10,000 to €20,000. SelfBuild Ireland notes that a basic kitchen at €3,000 can reach €8,000 or €10,000 once fitting and appliances are added.

At the higher end, The Home Upgrade Co. says its own fitted kitchens start from €12,000 fitted, including VAT. Seen against those totals, the fitting is usually 15 to 30% of a budget kitchen and less of a bespoke one. That is why a careful fit is worth paying for: it decides how the whole kitchen looks and lasts.

How to get an accurate kitchen fitting quote

Send the same information to every fitter, so the quotes are like for like.

  • The supplier’s kitchen plan, or the full order list with unit sizes
  • Photos of each wall, the floor and the way into the house
  • Whether the old kitchen needs to come out
  • The worktop material, and who is supplying it
  • Which appliances are integrated, and which are freestanding
  • Whether gas, electrical or plumbing changes are planned

You can also get a quick estimate from our kitchen fitting cost calculator, based on the number of units and the length of worktop.

Need a price for kitchen fitting?

Send the plan or a photo and we will price it.

Frequently asked questions

How much do kitchen fitters charge per day in Dublin?

Few Dublin fitters publish a day rate, because most price the whole kitchen. Published Dublin bands put labour-only fitting for a standard kitchen at about €1,500 to €3,500, and a standard fit takes five to seven days, so the work comes out at a few hundred euro a day.

Is it cheaper to get IKEA to fit my IKEA kitchen?

Not necessarily. IKEA Ireland quotes fitting at the planning stage and does not publish a price, and its service leaves out stone worktops and all gas, electrical and plumbing connections. An independent fitter can give a fixed price from the plan and also fit things IKEA's service will not, such as kitchens from other suppliers.

Does the kitchen fitting cost include taking out the old kitchen?

Not always, so ask. Removal and disposal of the old kitchen is often a separate line, because it depends on how much there is and whether services need to be disconnected first. Our fitting price includes taking the old kitchen away.

Do I pay VAT on kitchen fitting?

If your fitter is VAT registered, supply and installation of kitchen units as a fixture is charged at the reduced rate of 13.5%, subject to the two-thirds rule. Many sole-trader fitters are not registered, in which case no VAT is added. Always ask whether a quote includes VAT.

How long will I be without a kitchen?

Plan for about a week for a standard kitchen with laminate or wood worktops. With stone worktops, add the gap between templating and fitting, which Dublin worktop firms put at 7 to 10 working days.

What should a kitchen fitting quote include?

The number of units, panels and appliances being fitted, the worktop work, removal of the old kitchen, and a clear list of what is excluded, such as gas, electrics, plumbing, plastering and tiling.

Next steps

How we checked these figures

We loaded every source listed below on 18 November 2026 and checked that each figure appears on the page as quoted. Where two sources gave different bands for the same thing, we show both and say which is which. We used Irish sources for every price; the one UK source is used only for how long each stage of a fit takes, not for cost. We did not use forum posts, because the Irish forum threads we found could not be loaded and checked. Our own starting price (from €1,500) is set at the bottom of the published Dublin band, not from a survey of our past jobs.

Where the numbers come from

  1. Bespoke kitchen vs flat pack, Aloco Kitchens, 2026
  2. New kitchen costs in Ireland, Aloco Kitchens, 2026
  3. Kitchen installation service, IKEA Ireland, checked 18 November 2026
  4. Fitted kitchens vs IKEA, The Home Upgrade Co., 26 September 2026
  5. Kitchen and bathroom costs, SelfBuild Ireland
  6. Worktop services Dublin, Worktops Ireland, checked 18 November 2026
  7. Worktop installation prices, kitchenworktops.ie, checked 18 November 2026
  8. Installing a kitchen: how long does it take?, MyJobQuote (UK fitters' answers)
  9. VAT rates: Kitchen units (supply), Revenue, published 12 March 2024
  10. Current VAT rates, Revenue, rates from 1 January 2026
  11. RGI and Safe Electric, Commission for Regulation of Utilities
01 230 8966WhatsApp
Chat on WhatsApp